Surfacing: taping and blocking the lenses, generating, polishing and lens washing. In particular, you can expect to: ยง Surfacing: o Surfacing Blocker: Utilize the blocking machine to accurately secure a block to all lenses going through the surfacing department. Operate taping equipment to apply protective tape to the front of the lenses. o Generator Operator: Operate the generator machine used to cut the lenses to the correct prescription. o Surface Finer/Polisher: Operate the equipment used to fine and polish all lenses going through the surfacing department. o Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses. Grasp lens with de-blocking cup and strike against table to remove block from lenses. Remove tape from lenses. In particular, you will have the following accountabilities: Engagement Mission Participate in Stand-up Meetings Provide feedback to supervisors and coworkers (Communication) Quality Right the First Time Best Practice sharing Stop the Line fully implemented Customer Feedback process Clean, Standardize, Audit and Approve 5s Workstations Optimized Work cell led improvements Red/Green Board Monitoring Flow and Balance Small batch flow Pull System Launch Criteria Balance Flow FIFO